• December 07. 2022

RF-35 High volume commercial microwave and RF laminate Taconic RF-35 is an organic-ceramic laminate in the ORCER family of Taconic products. lt is based on woven glass reinforcement. RF-35 PCB is a result of Taconic's expertise in both ceramic fill technology and in coated PTFE fiberglass. RF-35 material is the best choice for low cost, high volume commercial microwave and radio frequency applicat...

• December 13. 2022

Teflon PTFE PCB High-frequency PCBs using polytetrafluoroethylene (PTFE) as their PCB substrate are known as Teflon PCBs or PTFE PCBs. Teflon PCBs transmit signals at frequencies up to 5 GHz. Dupont Corporation markets its PTFE materials under the Teflon brand name, which is so well-known that people often refer to PTFE substrate PCBs used in microwave and RF applications as Teflon PCBs. Propertie...

• December 14. 2022

Taconic CER-10 RF PCB Printed Circuit Board CER-10 is an organic-ceramic DK-10 laminate in the ORCER family of Taconic products. It is based on a woven glass reinforcement. CER-10 PCB exhibits exceptional interlaminar bond strength and solder resistance. Its proprietary composition results in low moisture absorption and uniform electrical properties. Taconic CER 10 PCB has a board between each lam...

• December 20. 2022

What's the Features  & Bebefits for TC600 PCB? For use as a printed circuit board substrate, the "Best-In-Class" thermal conductivity of the TC600 woven fiberglass reinforced, ceramic filled, PTFE-based composite is intended to improve heat transmission while lowering insertion and dielectric loss. Greater amplifier and antenna gains/efficiencies are produced via lower losses. For the 6.1...

• December 28. 2022

RT/duroid 6006 High Frequency PCB RT/duroid 6006 high frequency PCBs are ceramic PTFE composites which are designed for electronic and microwave circuit applications requiring a high dielectric constant. RT/duroid 6006 PCB can provide us with hi...

• January 04. 2023

As 5G Technology develops, more and more devices request high-performance high-frequency PCBs and RF PCBs that need low signal losses and low electrical noise. Rogers PCB materials are cost-effective and perfectly meets the required technological requirements. Rogers PCB is a type of high-frequency board that raw material is produced by Rogers company. It is different from the conventional PCB boa...