• December 14. 2022

Taconic CER-10 RF PCB Printed Circuit Board CER-10 is an organic-ceramic DK-10 laminate in the ORCER family of Taconic products. It is based on a woven glass reinforcement. CER-10 PCB exhibits exceptional interlaminar bond strength and solder resistance. Its proprietary composition results in low moisture absorption and uniform electrical properties. Taconic CER 10 PCB has a board between each lam...

• January 04. 2023

As 5G Technology develops, more and more devices request high-performance high-frequency PCBs and RF PCBs that need low signal losses and low electrical noise. Rogers PCB materials are cost-effective and perfectly meets the required technological requirements. Rogers PCB is a type of high-frequency board that raw material is produced by Rogers company. It is different from the conventional PCB boa...

• January 06. 2023

Rogers 4003 PCB High Frequency Printed Circuit board The basic components of Rogers 4003 are hydrocarbons and filled ceramics. The dielectric constant for Rogers 4003 is 3.55. High-frequency PCBs made of Rogers 4003 have good consistency and stability. As a member of the 4000 series, Rogers 4003 material can be pressed using Rogers 4003 in place of FR4. The Rogers 4003 prepreg suggests using RO445...

• January 10. 2023

Acquire Knowledge of Rogers 5880 Laminated PCB Materials Rogers 5880 laminated materials are produced using the same superior, dependable materials and techniques as Rogers, earning Rogers significant recognition from high-frequency material producers. The PCB's dielectric qualities play a key role in some designs. Power management is essential for all applications, whether high-speed, RF, microwa...

• January 11. 2023

Rogers AD250C - A New Microwave PCB Material Check out the Rogers AD250C if you're seeking for a new microwave PCB material. This dielectric-layered, ceramic hydrocarbon-based microwave high-frequency PCB material is reasonably priced. Let's examine this content in more detail. Why is it so successful? Let's proceed with it now. Insulating layer made by Rogers AD250C You can combine FR-4 and a rob...

• February 01. 2023

Rogers RT/duroid 6006 and 6010.2LM PCB PCB material is primarily used in electronic and microwave circuits. Its performance has a significant impact on the circuit system's signal transmission speed, energy loss, and characteristic impedance. Rogers Corporation, a well-known material supplier, has introduced RT/duroid 6006 and 6010.2LM, a high performance microwave PCB material. It is made of cera...