• April 22. 2022

Generally speaking, high frequency can be defined as the pre-rate above 1GHz. The most commonly used high-frequency circuit board substrates are fluorine-based dielectric substrates. For example, polytetrafluoroethylene (PTFE) is usually called Teflon, which is usually used above 5GHz. , In addition, FR-4 or PPO substrate is also used, which can be used for products between 1GHz-10GHz. The physica...

• May 06. 2022

Rogers TMM 6 Microwave high frequency board material has isotropic dielectric constant (Dk). Like other TMM series materials, Rogers TMM 6 combines many of the desirable properties of ceramic and PTFE substrates and utilizes simple flexible plate machining techniques. Rogers TMM6 Thermosetting MICROWAVE HF board materials are designed for ribbon-line and microstrip line applications with high reli...

• May 25. 2022

What Material Does the High Frequency Board Use? Rogers Use More What material does the hf board use? What boards are available? Do not know what high-frequency board materials, how to process, what are the characteristics of each material, today, Bicheng will tell you some practical information that focuse on providing high-frequency circuit board! High frequency board refers to the special elect...

• June 01. 2022

The Introduction of Rogers RO4000 Series Material Rogers' RO4000 series of hydrocarbon and ceramic packed laminates and semi-cured sheets offer industry-leading high frequency performance and low circuit processing costs, a material that is compatible with FR-4 processing processes, including PCB multilayer structures, without the need for special hole pretreatments similar to sodium etching. The ...

• June 08. 2022

Rogers HF Board - Microwave RF Circuit Board 24GHz microwave radar sensor is widely used in vehicle active safety, intelligent transportation, safety protection, industrial applications and uav collision avoidance. Receiving antenna, as the key reproductive device of radar sensor, plays a "throat" effect in radar sensor. On the one hand, it needs to transmit rf signals as much as possible. On the ...

• June 15. 2022

The FR4 and the Mixing of Rogers Substrate Parameters and Normal Thickness 1. FR-4 substrate parameter classification: dielectric constant parameter, dielectric loss parameter, IG value parameter FR-4 susbstrate is made of epoxy resin + glass cloth pressed into a double-sided FR4 PCB board, - commonly used FR4 copper-coated plate, relative to the air dielectric constant is 4.2-4.7. This permittivi...