• December 13. 2022

Teflon PTFE PCB High-frequency PCBs using polytetrafluoroethylene (PTFE) as their PCB substrate are known as Teflon PCBs or PTFE PCBs. Teflon PCBs transmit signals at frequencies up to 5 GHz. Dupont Corporation markets its PTFE materials under the Teflon brand name, which is so well-known that people often refer to PTFE substrate PCBs used in microwave and RF applications as Teflon PCBs. Propertie...

• December 20. 2022

What's the Features  & Bebefits for TC600 PCB? For use as a printed circuit board substrate, the "Best-In-Class" thermal conductivity of the TC600 woven fiberglass reinforced, ceramic filled, PTFE-based composite is intended to improve heat transmission while lowering insertion and dielectric loss. Greater amplifier and antenna gains/efficiencies are produced via lower losses. For the 6.1...

• January 04. 2023

As 5G Technology develops, more and more devices request high-performance high-frequency PCBs and RF PCBs that need low signal losses and low electrical noise. Rogers PCB materials are cost-effective and perfectly meets the required technological requirements. Rogers PCB is a type of high-frequency board that raw material is produced by Rogers company. It is different from the conventional PCB boa...

• January 06. 2023

Rogers 4003 PCB High Frequency Printed Circuit board The basic components of Rogers 4003 are hydrocarbons and filled ceramics. The dielectric constant for Rogers 4003 is 3.55. High-frequency PCBs made of Rogers 4003 have good consistency and stability. As a member of the 4000 series, Rogers 4003 material can be pressed using Rogers 4003 in place of FR4. The Rogers 4003 prepreg suggests using RO445...

• January 10. 2023

Acquire Knowledge of Rogers 5880 Laminated PCB Materials Rogers 5880 laminated materials are produced using the same superior, dependable materials and techniques as Rogers, earning Rogers significant recognition from high-frequency material producers. The PCB's dielectric qualities play a key role in some designs. Power management is essential for all applications, whether high-speed, RF, microwa...

• January 11. 2023

Rogers AD250C - A New Microwave PCB Material Check out the Rogers AD250C if you're seeking for a new microwave PCB material. This dielectric-layered, ceramic hydrocarbon-based microwave high-frequency PCB material is reasonably priced. Let's examine this content in more detail. Why is it so successful? Let's proceed with it now. Insulating layer made by Rogers AD250C You can combine FR-4 and a rob...