![20 mil RO4003C PCB](/uploadfile/bannerimg/16336600179273.jpg)
Call Us Now !
Tel : +86 755 27374946
Order Online Now !
Email : info@bichengpcb.com
PTFE and F4B Polytetrafluoroethylene (or PTFE), commonly known as "Plastic King", is a polymer compound formed by polymerization of tetrafluoroethylene. It has excellent chemical stability, corrosion resistance, airtightness, high lubrication and non-stick properties, Insulation and good aging resistance. Used as engineering plastics, it can be made into PTFE tubes, rods, belts, plates, films, etc...
TMM Series Laminate Materials TMM series temperature stable microwave composite circuit board materials are thermosetting resin polymer composite materials filled with ceramic powder, specially designed for high-reliability stripline and microstrip line applications. TMM series laminate materials are suitable for a wide dielectric constant Scope and surface coating requirements. The electrical and...
Via is one of the important components of multi-layer PCB circuit boards, and the cost of drilling usually accounts for 30% to 40% of the cost of PCB manufacturing. Simply put, every hole on the PCB can be called a via. From the point of view of function, vias can be divided into two categories: One is used as electrical connection between layers The second is to fix or locate the device In terms ...
With the rapid development of electronic communication technology, in order to achieve high-speed and high-frequency signal transmission, more and more high-frequency printed circuit boards are used in communication equipment. The dielectric materials used in high-frequency boards have excellent electrical properties and good Chemical stability, then which of the following is its main manifestatio...
Why do PCBs need impedance Control? 01 What is Impedance In circuits with resistance, inductance, and capacitance, the resistance to alternating current is called impedance. Impedance is usually represented by Z, which is a complex number. The real part is called resistance, and the imaginary part is called reactance. The blocking effect of capacitance on alternating current in the circuit is call...
Choosing the Right RF PCB Material When designing RF PCBS applications, the choice of PCB substrate materials is a key performance factor. For complex microwave structures that are mechanically reliable and electrically stable, an optimal combination of electrical and mechanical properties is required. The extremely low dielectric constant thermal coefficient provides the electrical stability soug...
Categories
New Blog
Tags
© Copyright: 2024 Shenzhen Bicheng Electronics Technology Co., Ltd.. All Rights Reserved.
IPv6 network supported