• June 01. 2022

The Introduction of Rogers RO4000 Series Material Rogers' RO4000 series of hydrocarbon and ceramic packed laminates and semi-cured sheets offer industry-leading high frequency performance and low circuit processing costs, a material that is compatible with FR-4 processing processes, including PCB multilayer structures, without the need for special hole pretreatments similar to sodium etching. The ...

• June 08. 2022

Rogers HF Board - Microwave RF Circuit Board 24GHz microwave radar sensor is widely used in vehicle active safety, intelligent transportation, safety protection, industrial applications and uav collision avoidance. Receiving antenna, as the key reproductive device of radar sensor, plays a "throat" effect in radar sensor. On the one hand, it needs to transmit rf signals as much as possible. On the ...

• June 15. 2022

The FR4 and the Mixing of Rogers Substrate Parameters and Normal Thickness 1. FR-4 substrate parameter classification: dielectric constant parameter, dielectric loss parameter, IG value parameter FR-4 susbstrate is made of epoxy resin + glass cloth pressed into a double-sided FR4 PCB board, - commonly used FR4 copper-coated plate, relative to the air dielectric constant is 4.2-4.7. This permittivi...

• July 13. 2022

What's the Difference between High-Frequency Microwave PCBs and Aluminum-based PCBs? 1. Let’s talk about high-frequency microwave printed circuit boards first High-frequency microwave printed circuit boardsare heating up in China. In recent years, many printed circuit board companies in East China, North China, and the Pearl River Delta have been staring at the market of high-frequency microwave b...

• August 10. 2022

Hello everyone, Today, we are going to talk about high frequency PCB built on Rogers RO3035 substrates. Rogers RO3035 PCBs are ceramic-filled PTFE based high frequency circuit boards. Its expansion coefficient is matched to that of copper, which allows the PCBs to exhibit excellent dimensional stability. RO3035 materials have dielectric constant of 3.50 at 10GHz. With the characteristics of stable...

• August 25. 2022

RO4003C High Frequency PCB We’re going to introduce high frequency PCB built on RO4003C laminates. RO4003C high frequency materials are woven glass reinforced hydrocarbon ceramic-filled laminates produced by Rogers Corporation. It has the similar electrical properties of PTFE/woven glass and manufacturability of epoxy resin materials. RO4003C materials are designed to offer superior high frequency...